PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers, and associated electronics for the measurement of dynamic pressure, force, and vibration. The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible. These ICP® sensors gained wide popularity and became the foundation for the company's success.

Subsequent growth and steady investment in facilities, machinery, and equipment permitted a constant broadening of the product offering. Measurement capabilities expanded with the addition of piezoceramic, tourmaline, capacitive, piezoresistive, and strain gage sensing technologies. Ensuing products include industrial accelerometers, DC accelerometers, load cells, torque sensors, microphones, pressure transmitters, and calibration equipment.

The backbone of the company is its mission statement: Total Customer Satisfaction. This mission is not only supported by products that offer great value, but also backed by our industry exclusive Lifetime Warranty Plus. Factory applications engineering and a worldwide network of sales offices and representatives are readily available to assist with customer requests.

About PCB Piezotronics

625B01

Platinum Stock Products; Ring-style, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.2 to 10.5k Hz, side exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

  • Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²)) 
  • Frequency Range: (±3dB) 12 to 630000 cpm (0.2 to 10500 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 5.1 oz (145 gm)
 English:SI: 
Performance
Sensitivity (±5 %) 100 mV/g 10.2 mV/(m/s²) [1] 
Measurement Range ±50 g ±490 m/s²  
Frequency Range (±5 %) 30 to 390000 cpm 0.5 to 6500 Hz [4] 
Frequency Range (±10 %) 22 to 450000 cpm 0.37 to 7500 Hz  
Frequency Range (±3 dB) 12 to 630000 cpm 0.2 to 10500 Hz  
Resonant Frequency 1500 kcpm 25 kHz [2] 
Broadband Resolution (1 to 10000 Hz) 50 µg 491 µm/sec2 [2] 
Non-Linearity ±1 % ±1 % [3] 
Transverse Sensitivity ≤5 % ≤5 %  
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
Temperature Range -65 to +250 °F -54 to +121 °C  
Temperature Response See Graph %/°F See Graph %/°F [2] 
Enclosure Rating IP68 IP68  
Electrical
Settling Time (within 1% of bias) ≤8.0 sec ≤8.0 sec  
Discharge Time Constant ≥1.0 sec ≥1.0 sec  
Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
Constant Current Excitation 2 to 20 mA 2 to 20 mA  
Output Impedance <100 Ohm <100 Ohm  
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
Spectral Noise (10 Hz) 2.5 µg/√Hz 24.5 (µm/sec2)/√Hz [2] 
Spectral Noise (100 Hz) 0.8 µg/√Hz 7.8 (µm/sec2)/√Hz [2] 
Spectral Noise (1 kHz) 0.5 µg/√Hz 4.9 (µm/sec2)/√Hz [2] 
Electrical Protection RFI/ESD RFI/ESD  
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
Size - Diameter 1.36 in 35.1 mm  
Size - Height 1.13 in 28.7 mm  
Weight 5.1 oz 145 gm  
Mounting Through Hole Through Hole  
Mounting Thread 1/4-28 Male Not Applicable [5] 
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
Sensing Element Ceramic Ceramic  
Sensing Geometry Shear Shear  
Housing Material Stainless Steel Stainless Steel  
Sealing Welded Hermetic Welded Hermetic  
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
Electrical Connection Position Side Side  
All specifications are at room temperature unless otherwise specified.

 

 

CEcsa_us

 

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080B45 Thermal Boot (1)
081A73 Captive mounting bolt 1/4-28 x 1.34" (1)
ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency (1)
Captcha Code

Click the image to see another captcha.